網站內容顯示 網站內容顯示

Remote Control

Software Download Contents Language / Config.
U3800 GPIB_GetTrace
  • Remote control of U3800 via GPIB.
  • Getting waveform data (Binary, ASCII, Real, IQ) into PC.
  • Possible to send a command to U3800 as you want.
  • Installer
  • Source code (VB)
  • Manual
U3800 LAN_GetTrace
  • Remote control of U3800 via LAN.
  • Getting waveform data (Binary, IQ) into PC's Viewer.
  • Possible to send a command to U3800 as you want.
  • Installer
  • Source code (VB)
  • Manual
U3800 LAN_DspTrace
  • Updated version from "LAN GetTrace". Additional functions:
    Save IP Adrs, Select trace, Marker, Inverse display, etc.
  • Installer
  • Source code (VB)
  • Manual

Power Measure

Software Download Contents Language / Config.
U3800 GPIB_CH1CH2
  • Remote control of U3800's CH1/CH2 display via GPIB.
  • The power measurement sample using CH1 or CH1CH2.
  • Installer
  • Source code (VB)
  • Manual
U3800 LAN_CH1CH2
  • Remote control of U3800's CH1/CH2 display via LAN.
  • The power measurement sample using CH1 or CH1CH2.
  • Installer
  • Source code (VB)
  • Manual
U3800 Power_Trend
  • Measure the trend data of marker point (F, L) or Ch Power.
  • Possible to save the data file to PC.
  • Installer
  • Source code (VB)
  • Manual
U3800 PowerMeasFunc
  • Measure the power of burst signal using the FFT Mode.
  • The FFT mode contains power calculation function.
  • Installer
  • Source code (VB)
  • Manual
U3800 PowerMeasDGT
  • Measure the power of burst signal using the Time Domain.
  • It's for high speed measurement.
  • Installer
  • Manual

Application

Software Download Contents Language / Config.
U3800 RF_Monitor2ch
  • Updated version from 'LAN DspTrace' for 2ch mode.
  • Added the measurement data save function.
  • Added the Max, Min Functions for RF Monitor.
  • Installer
  • Manual
U3800 FEFS_3700 Viewer
  • RF Monitoring software for 2ch Spectrum Analyzer.
  • Features are Long Time, Limit Lines, Graphs.
VISA Driver:
NI_Installer_Option_for_Viewer (or from National Instruments)
  • Installer
    (LabVIEW)
  • Manual
U3800 Ant_Posi_Adj
  • Level monitoring for an antenna adjustment at installation.(Digital version of Y out)
  • A changing signal can be measured.
  • Installer
  • Manual
U3800 EMI_Meas1ch
  • EMI measurement for Input-1. 1st, measure with PK detector and list the noise peak, 2nd, measure them with QP detector.
  • Installer
  • Manual
U3800 EMI_Meas2ch
  • EMI Measurement for 2ch mode using U3841(3GHz).
  • Can measure different frequency bands at the same time.
  • Installer
  • Manual
U3800_Little_APD
  • A simple APD measurement is done by the U3800 series.
  • CH1/CH2 simultaneous measurement can be compared.

    * The NI VISA is necessary.
  • Installer (LV)
  • Manual
  • NI VISA Driver in FEFS_Viewer
U3800_Trace_Correlation
  • A Correlation measurement is done by the U3800 series. The correlation of CH1 and CH2 can be measured.

    * The NI VISA is necessary.
  • Installer (LV)
  • Manual
  • NI VISA Driver in FEFS_Viewer
U3800 PAS Vision

Option
Universal Tower Table
  • Get the data of level(CH1) and phase- difference(CH1/CH2) using Xmath mode. The graphs and the CSV file are possible.
  • The option software can control Antenna Tower and Turn Table.

    * NI VISA is necessary.
  • Installer (LV)
  • Manual
  • NI VISA Driver in FEFS_Viewer
U3800 1chDGT_3700 Viewer
  • The data acquired with TDA(DGT) is displayed in various graphs. The IQ data re-sampling is possible.

    * The NI VISA is necessary.
  • Installer (LV)
  • Manual
  • NI VISA Driver in FEFS_Viewer
U3800 2ch2ch_3700 Viewer
  • The data acquired with 2ch is displayed in various graphs. 2ch XY-Graph is possible.

    * The NI VISA is necessary.
  • Installer (LV)
  • Manual
  • NI VISA Driver in FEFS_Viewer
U3800_GetTraceData_3700
  • The Spectrum waveform is displayed in the Spectrogram and 3D graph. Moreover, the CSV file of user-written can be displayed.

    * The NI VISA is necessary.
  • Installer (LV)
  • Manual
  • NI VISA Driver in FEFS_Viewer
U3800 XML-CSV Viewer
  • XML/CSV file acquired in the USB memory are converted into Excel file (.xls).
    The screen image is seen in Excel.
  • Exe File
  • Manual
U3800 Screen Shot 3700
  • The Screen of SA is copied directly to the personal computer. The Screen Shot is the PNG file format.
  • Installer
  • Manual

Vector Correction

Software Download Contents Language / Config.
U3800 Vector Correction (8GHz)
  • Example of doing VectorCorr by using internal SG (max.8GHz).
    After acquiring data once, each band does the recall.
  • Installer
  • Source code (VB)
  • Manual
U3800 Vector Correction (Ext)
  • Example of doing Vector Correction by using external SG. See Manual: "Program for correcting multiple points using external SG".
  • Installer
  • Source code (VB)
  • Manual

Recall File

Software Download Contents Language / Config.
U3800 Recall_EMI_Meas
  • This "Recall files" are for EMI Measurement.
  • The files are used by 2ch Spectrum Analyzer.
  • Recall File
  • Manual
U3800 Recall_JpnDTV_CN
  • This "Recall files" are for Japan DTV signal CN measurement.
  • The files are used by 2ch Spectrum Analyzer.
  • Recall File
  • Manual